燕山大学学报Issue(1)：10-15,6.DOI:10.3969/j.issn.1007-791X.2014.01.002
基于条元法的异步轧制金属三维塑性变形分析
Analysis of three-dimensional metal forming by cross shear rolling based on strip element method
摘要
Abstract
A three-dimensional metal forming by the cross shear rolling is developed using the strip element method. First, the unit rolling force formula and the neutral point coordinates formula are derived. The derived formulae are suitable for the cross shear rolling, and the calculation of the friction by considering adhesion. Second, the distribution regularities of the stress, the strain, and the frictional force in deformation zone by the cross shear rolling are obtained by the simulation analysis. Finally, the effect of different ratio on the equivalent force and the effect of different entrance thickness on the rolling pressure are analyzed.关键词
异步轧制/条元法/搓轧区/轧制压力Key words
cross shear rolling/strip element method/cross shear zone/rolling pressure分类
矿业与冶金引用本文复制引用
彭艳,张海丽..基于条元法的异步轧制金属三维塑性变形分析[J].燕山大学学报,2014,(1):10-15,6.基金项目
国家自然科学基金资助项目（51375424）；国家科技支撑计划资助项目 （）
