岩土力学Issue(3)：847-854,8.
基于局部强度折减法的边坡多滑面分析方法及应用研究
Analytic approach of slope multi-slip surfaces based on local strength reduction method and its application
摘要
Abstract
The approach of searching the most dangerous slip surface is always a hot area for research. However, the other secondary potential slip surfaces, which do not meet the requirement of safety, should also receive attentions. The shear strength parameters of the whole area are reduced in the conventional strength reduction method; but only the minimum safety factor and the most dangerous slip surface can be obtained through this approach. An analysis method of slope multi-slip surfaces, which is based on local strength reduction method, is proposed. Firstly, the safety factor of each element is defined and calculated;different element sets with the safety factors falling in various specific scopes are found out automatically. And then the shear strength parameters of those element sets are reduced respectively; the slip surfaces corresponding to different safety factors are located. The feasibility of this approach is verified through a slope with single step and a slope with double steps. The results show that the depth of the secondary slip surface and the slip area enlarge with the increase of the safety factor of the slope. At last, this method is applied to stability analysis of a slope located at the entrance of a tunnel;and the multi-slip surfaces acquired from the proposed method can agree well with the field data.关键词
多滑动面/强度折减法/边坡/稳定性分析/安全系数Key words
multi-slip surfaces/strength reduction method/slope/stability analysis/factor of safety分类
建筑与水利引用本文复制引用
李小春,袁维,白冰,石露..基于局部强度折减法的边坡多滑面分析方法及应用研究[J].岩土力学,2014,(3):847-854,8.基金项目
国土资源部公益性项目(No.201211063)；中国科学院事业费专项重大重要方向性项目(No.KZCX2-YW-T12)。 （No.201211063）
