原子能科学技术Issue(11)：2152-2155,4.DOI:10.7538/yzk.2013.47.11.2152
ICF冷冻靶中Si冷却臂结构的初步设计
Primary Design of Si Cooling Arm Structure in ICF Cryogenic Target
张勇 1唐昶环 2张继成 2易勇1
作者信息
- 1. 西南科技大学 材料科学与工程学院，四川 绵阳 621010
- 2. 中国工程物理研究院 激光聚变研究中心，四川 绵阳 621900
- 折叠
摘要
Abstract
According to the requirement of the cryogenic target system to the Si cooling arm structure ,the Si cooling arm was primarily designed based on the USA National Ignition Facility (NIF) target .A new three-dimensional model of Si cooling arm was developed by SolidWorks software ,and the simulation and analysis of Si cooling arm in aspect of mechanical property ,thermal response and assembly were made based on the model .A law about the effect of the arm length of Si cooling arm and the width and the length of bifurcation on Si cooling arm was achieved .The research may provide the the-oretical foundation and reference for the further improvement of cryogenic target .关键词
ICF/冷冻靶/Si冷却臂/SolidWorksKey words
ICF/cryogenic target/Si cooling arm/SolidWorks分类
数理科学引用本文复制引用
张勇,唐昶环,张继成,易勇..ICF冷冻靶中Si冷却臂结构的初步设计[J].原子能科学技术,2013,(11):2152-2155,4.
