中国电机工程学报Issue(30)：113-120,8.
屏蔽电机定子齿压板局部温升过高分析
Research on the Local Overheating of Stator Finger Plates for Canned Primary Pump Motors
摘要
Abstract
The canned primary pump motor which is mainly used to carry the fluid of high temperature, high pressure, radioactive, toxicity and causticity, it plays an important part in chemical plants and nuclear power stations. Therefore its safe and steady operation is very important to the loop system. Basing the complex of heating and cooling and the specialty of high temperature and air proof conditions, a physical model of three dimensional temperature coupled field for a 5000kW large canned motor of the primary pump was established in this paper. During the delivery test, abnormal temperature occurred in the finger plate. The temperature of the finger plate and the cone ring was calculated using the finite volume method. Calculation results revealed the cause. Thus the configuration was modified. A new connecting scheme of finger plates with insulation and the cone ring was provided. The overheat problem at the motor’s end was resolved. Furthermore, the theory and practice basis will be provided for cooling structure design and temperature calculation accurately of canned primary pump motors of larger capacity.关键词
主泵屏蔽电机/温度场/绝缘/齿压板/锥形环/过热Key words
canned motor of primary pump/temperature field/insulation/finger plate/cone ring/overheat分类
能源科技引用本文复制引用
陈卫杰,苗立杰,丁树业..屏蔽电机定子齿压板局部温升过高分析[J].中国电机工程学报,2013,(30):113-120,8.基金项目
国家自然科学基金项目(51277045)；黑龙江省自然科学基金项目(QC2012C109)；黑龙江省教育厅科学基金项目(12531112)。Project Supported by National Natural Science Foundation of China (51277045) （51277045）
The Project Supported by Heilongjiang Provincial Natural Science Foundation of China (QC2012C109) （QC2012C109）
Foundation of Heilongjiang Province Educational Department (12531112) （12531112）
