中国医学装备Issue(11)：13-16,17,5.DOI:10.3969/J.ISSN.1672-8270.2013.11.005
医用灭菌设备温度计校准规范实验的验证
The experimental verification of thermometer calibration specification for medical sterilization equipment
摘要
Abstract
Objective: To alidate the On-line calibration method of temperature measuring instrument about Calibration specification of the temperature measurement parameters for the thermal sterilization process. It is also test the accuracy and reliability of detection device. Methods:The temperature and pressure detection device is used, in the two kinds of conditions in the no-load. When the sterilizing procedures runs, the sterilization process is monitored through the software. Results: It is verified the feasibility of on-line calibration method in the specification through the experiment. The accuracy and reliability is verified of test device. Conclusion:experiments show that the calibration method of the standard is simple and feasible, the operator can adjust temperature of sterilizer based on specification they can ensure the quality and safety of sterilizer.关键词
灭菌/温度/校准/实验/验证Key words
Sterilization/Temperature/Calibration/Test/Verification分类
医药卫生引用本文复制引用
田越,崔骊,李向东,云庆辉,黄殿忠..医用灭菌设备温度计校准规范实验的验证[J].中国医学装备,2013,(11):13-16,17,5.基金项目
军事医学计量科研专项课题(2011-JL2-039)“医用灭菌设备温度计校准规范实验验证及检测装置准确性论证” （2011-JL2-039）
