铸造技术2014，Vol.35Issue(11)：2473-2475,3.
3003/4004铝合金复层圆铸坯力学性能分析
Analysis on Mechanical Performance of Cladding Round Billet of 3003/4004 Aluminum Alloy
李岩 1盖磊 2柳智鑫1
作者信息
- 1. 内蒙古电子信息职业技术学院,内蒙古呼和浩特010070
- 2. 丹佛斯自动控制管理上海有限公司,上海200040
- 折叠
摘要
Abstract
The cladding round billets of 3003 and 4004 aluminum alloy were fabricated by continuous casting water-cooling method,and the mechanical properties of round billets were analyzed.The interfacial bonding strength was tested by tensile experiments,the microstructure of billet was observed through OM,the line scanning analysis of blank elements were carried out by EPAM,and the two kinds of aluminum alloys were compared.The results show that the diffusion ability of Si element in 4004 aluminum alloy is stronger than that of Mn element in 3003 aluminum alloy,and the interfacial bonding strength of 4004 aluminum alloy is higher than that of 3003 aluminum alloy.关键词
3003铝合金/4004铝合金/连续铸造/水冷Key words
3003 aluminum alloy/ 4004 aluminum alloy/ continuous casting/ water-cooling分类
通用工业技术引用本文复制引用
李岩,盖磊,柳智鑫..3003/4004铝合金复层圆铸坯力学性能分析[J].铸造技术,2014,35(11):2473-2475,3.
