安徽工程大学学报Issue(4)：23-26,4.
田口方法及其在注塑成型中的应用
Taguchi method and its application in inj ection molding
茆茂 1朱先琦1
作者信息
- 1. 安徽工程大学 机械与汽车工程学院，安徽 芜湖 241000
- 折叠
摘要
Abstract
Taguchi method is introduced and the inj ection molding process parameters are optimized by combining the parameter design method with Moldflow(a simulation software)and Hypermesh(a finite element software).This article studies the influence of inj ection molding process parameters on the warp-age by taking the water segregator in an electrical appliance as an example.The optional parameter com-bination gained from the experiment can greatly reduce the warpage.关键词
田口方法/注塑成型/工艺参数/翘曲Key words
taguchi method/inj ection molding/process parameters/warpage分类
化学化工引用本文复制引用
茆茂,朱先琦..田口方法及其在注塑成型中的应用[J].安徽工程大学学报,2014,(4):23-26,4.
