表面技术Issue(5)：43-47,5.DOI:10.16490/j.cnki.issn.1001-3660.2015.05.008
镁合金表面沉积铜钨复合涂层工艺及涂层性能研究
Process Preparation and Properties of Cu/W Composite Coatings on the Surface of Mg Alloy
贾平平 1马捷 1王晓光 1魏建忠 1范爱玲1
作者信息
摘要
Abstract
Objective To improve the corrosion properties and wear resistance of magnesium alloy surface. Methods Cu/W composite coatings were prepared successfully on magnesium alloy surface by cold spray and chemical vapor deposition (CVD). The microstructure, chemical components, morphology, wear resistance, corrosion properties of composite coatings and the binding force of composite coatings were studied. Results The surface hardness of Cu/W composite coatings increased by 687. 1 HV com-pared to magnesium alloy matrix, the wear rate fell to 0. 020% from 0. 032%, the corrosion potential increased by 1. 3 V and the critical load of composite coatings improved by 120. 5 N compared to W layer directly prepared by CVD. Conclusion Preparation of Cu/W composite coatings significantly increased wear resistance, corrosion properties and greatly improved the coating adhesion.关键词
化学气相沉积/冷喷涂/Cu/W复合涂层/耐磨性/耐蚀性/结合力Key words
CVD/cold spray/Cu/W composite coatings/wear resistance/corrosion properties/the binding force分类
矿业与冶金引用本文复制引用
贾平平,马捷,王晓光,魏建忠,范爱玲..镁合金表面沉积铜钨复合涂层工艺及涂层性能研究[J].表面技术,2015,(5):43-47,5.
