| 注册
首页|期刊导航|表面技术|拉矫参数对带钢氧化皮剥离及酸洗性能的影响

拉矫参数对带钢氧化皮剥离及酸洗性能的影响

叶东东 邵素娟 阴子良 陈广 陈建钧

表面技术Issue(7):125-130,6.
表面技术Issue(7):125-130,6.DOI:10.16490/j.cnki.issn.1001-3660.2015.07.023

拉矫参数对带钢氧化皮剥离及酸洗性能的影响

Influence of Descaling Parameters on the Spalling and Pickling Properties of Oxide Scales

叶东东 1邵素娟 1阴子良 1陈广 1陈建钧1

作者信息

  • 1. 华东理工大学 机械与动力工程学院,上海200237
  • 折叠

摘要

Abstract

ABSTRACT:Objective To study the effect of descaling parameters on oxide scale spalled and its pickling speed. Methods The hot-rolled strip was descaled by the self-designed descaling and tension leveler by adjusting the screw down amount and the tension, the test samples with different process parameters were analyzed and the surface and the interface morphology of samples were ob-served by metalloscope to analyze the shell-off ratio and the cracking of the oxide scales and compare the scale breading effects by tension and by compressive stress. And the method of first zero potential differential value was used to determine the pickling rate to explore the influence of stretch rolling parameters on pickling rate. Results The spalling rate of oxide scale increased with the in-crease of the amount of screw down and tension, but the former parameter reflected a stronger effect. When the screw down amount and the tension remained, the pickling time decreased with the increase of elongation. When the value of elongation was similar, the bigger screw down amount led to less pickling time. When elongation reached about 1. 36%, the pickling time was maintained at the lowest saturation valued around 24. 3 s. Conclusion In conclusion, oxide scale mainly spalled under compressive stress and the pickling time decreased rapidly. Cracking mainly occurred under tension and the effect of tension on increase of pickling rate was weaker than that of compressive stress. It was more beneficial to improve the pickling rate by improving the screw down a-mount.

关键词

拉矫/氧化皮/酸洗/压下量/张紧力

Key words

descaling/oxide scale/pickling/screw down amount/tension

分类

矿业与冶金

引用本文复制引用

叶东东,邵素娟,阴子良,陈广,陈建钧..拉矫参数对带钢氧化皮剥离及酸洗性能的影响[J].表面技术,2015,(7):125-130,6.

基金项目

国家自然科学基金(51105143,51375164) Fund:Supported by the National Natural Science Foundation of China(51105143,51375164) (51105143,51375164)

表面技术

OA北大核心CSCDCSTPCD

1001-3660

访问量0
|
下载量0
段落导航相关论文