吉林大学学报（信息科学版）Issue(3)：229-238,10.
基于FPGA的电子节气门控制器硬件设计与实现
Hardware Design and Implementation of Electronic Throttle Controller Based on FPGA
摘要
Abstract
In order to meet the control performance requirements of ETCS( Electronic Throttle Control System) , such as fast computational performance, low-cost, miniaturization, FPGA( Field Programmable Gate Array) is adopted as the hardware implementation of controller and integral separation is added to mature PID ( Proportional, Integral, Differential) control algorithm. And the integral separation PID controller with Catapult C high-level synthesis tools is implemented based on FPGA full hardware solution. An integral separation PID controller on a FPGA chip is designed for ETCS. In addition, AD/DA acquisition board is designed to implement the data transmission between integral separation PID controller based on FPGA and electronic throttle. Finally, tracking experiments of electronic throttle are performed and the results demonstrate the effectiveness of the designed integral separation PID controller based on FPGA.关键词
电子节气门控制系统/现场可编程门阵列/硬件实现/积分分离PID/实物实验Key words
electronic throttle control system/field programmable gate array/hardware implementation/integral separation proportional integral differential(PID) control algorithm/tracking experiments分类
信息技术与安全科学引用本文复制引用
许月亭,季冬冬,许芳,陈虹..基于FPGA的电子节气门控制器硬件设计与实现[J].吉林大学学报（信息科学版）,2014,(3):229-238,10.基金项目
国家自然科学基金重点资助项目(61034001) （61034001）
973课题基金资助项目(2012CB821202) （2012CB821202）
吉林省科技发展计划重大专项基金资助项目(20116001) （20116001）
