重庆理工大学学报（自然科学版）Issue(11)：24-31,8.DOI:10.3969/j.issn.1674-8425(z).2014.11.005
基于ABAQUS的激光喷丸成形有限元仿真
FEM Simulation of Laser Peen Forming Based on ABAQUS
摘要
Abstract
ABAQUS software was applied to simulate the laser peen forming of aluminum sheet with the order of the transient steady-state method. The simulation results are in good agreement with the experiment results. Simulation method for the Gaussian spatial distribution of laser and the distribution of high-voltage transients in numerical simulation was proposed. To explain the constitutive model,the element unit type selection,boundary conditions measurement and so on of materials and to provide solving methods in details. Based on the transient-steady solution,equivalent initial stress load static analysis methods were proposed,in which the laser peen forming parameters was equal to the initial perstress in order to analyze a large-scale of the pulse shaping problem. The connection between the test parameters and equivalent stress was established according to experiments results to avoid the esti-mating error of the pressure wave. It can not only simulate the deformation of the material accurately, but also speed up the solving speed .关键词
激光脉冲/ABAQUS/冲击波/高斯分布/初始预应力Key words
laser pulses/ABAQUS/shock waves/Gaussian distribution/initial prestress分类
信息技术与安全科学引用本文复制引用
丁华,李克勤..基于ABAQUS的激光喷丸成形有限元仿真[J].重庆理工大学学报（自然科学版）,2014,(11):24-31,8.基金项目
江苏省博士后基金资助项目（1102111C）；江苏大学高级人才启动基金资助项目 （）
