首页|期刊导航|焊管|加热温度对X80钢级热煨弯管组织性能的影响

加热温度对X80钢级热煨弯管组织性能的影响OA

Effects of Heating Temperature on Microstructures and Properties of X80 Grade Hot-bending Bends

中文摘要英文摘要

采用热模拟试验方法、力学性能测试技术及显微分析技术研究了加热温度对X80钢级热煨弯管组织性能的影响规律。结果表明,随着加热温度的升高, X80热煨弯管强度升高,塑韧性降低。加热温度为950℃时,组织形态以粒状贝氏体及贝氏体铁素体为主,辅之少量的软相组织,其优良强韧性的获得归因于细小的有效晶粒尺寸及多相分布的混杂组织单元;加热温度高于1050℃时,横贯奥氏体晶界的粗大贝氏体铁素体板条结构的存在可导致韧性的严重恶化;处于两相区加热温度为850℃时,多…查看全部>>

The effects of heating temperature on microstructures and properties of X80 grade heating bending were studied through thermal simulation, mechanical property test and microscopic analysis. The results showed that the strength of X80 grade hot-bending bends increases while plasticity and toughness decrease with the heating temperature increasing. When the heating temperature is 950℃, the microstructures of the experimental steel mainly consist of granular ba…查看全部>>

田晨超;许飞;焦磊;张娟;张骁勇

西北有色金属研究院,西安 710016西北有色金属研究院,西安 710016西北有色金属研究院,西安 710016西北有色金属研究院,西安 710016西安石油大学 材料科学与工程学院,西安710065

能源科技

X80钢级热煨弯管加热温度组织性能

X80 gradeheating bendingheating temperaturemicrostructureproperty

《焊管》 2014 (6)

油气输送管线钢在线碳配分机理、复相结构特征及塑性增长规律的研究

11-16,6

国家自然科学基金资助项目(51174165);陕西省教育厅项目(11JK0803)。

评论

您当前未登录!去登录点击加载更多...