华侨大学学报（自然科学版）Issue(6)：611-615,5.DOI:10.11830/ISSN.1000-5013.2014.06.0611
采用模腔压力曲线的注塑成型实验
Experimental Study on Injection Molding Using Cavity Pressure Curve
摘要
Abstract
Cavity pressure was measured by cavity pressure sensor to study cavity pressure in different position of injec-tion mold.Cavity pressure and plastic part residual stress during the molding process were measured to study the relation-ship between them.On the basis,the effects of injection pressure and packing pressure on cavity pressure curve configu-ration were discussed.The experiment result shows that cavity pressure has a close connection with plastic part residual stress and injection parameters.关键词
注塑成型/压力传感器/模腔压力曲线/注塑工艺参数Key words
injection molding/pressure sensor/cavity pressure curve/injection molding process parameter分类
生物科学引用本文复制引用
谢北萍,刘斌..采用模腔压力曲线的注塑成型实验[J].华侨大学学报（自然科学版）,2014,(6):611-615,5.基金项目
福建省自然科学基金资助项目 （）
