华西口腔医学杂志Issue(6)：596-600,5.DOI:10.7518/hxkq.2014.06.016
电解蚀刻法处理的钛及钛合金表面的对比研究
Comparative study of the titanium and titanium alloy implant electrolytic etching surface
摘要
Abstract
Objective This preliminary study aims to investigate the effects of titanium and titanium alloy micro-nanodimensional topography on the biological behavior of osteoblasts in vitro. Methods Electrolytic etching (EE) method was used to produce micro-nano dimensional titanium surfaces. The surfaces were observed to determine their effects on the adhesion, proliferation, cell morphology, and alkaline phosphatase (ALP) activity of osteoblasts. Results The surfaces of the titanium and titanium alloy groups exhibited higher adhesion and proliferation of osteoblasts than those of the mechanical group. The titanium surface was covered with a group of cells, a large number of filopodia, and functional particles. The ALP activity of the titanium group was significantly higher than that of the titanium alloy and mechanical groups. Conclusion EE method in pure titanium and titanium alloy surfaces result in bowl-like nests and nanostructures of different diameters and depths. The diameters of the pure titanium and titanium alloy surfaces range from 30 to 50 μm and 5 to 8 μm, respectively. The former is more conducive to promote the proliferation and differentiation of cells.关键词
纯钛/钛合金/种植体/成骨细胞/生物学行为/电解蚀刻Key words
titanium/titanium alloy/implant/osteoblast/biological behavior/electrolytic etching分类
医药卫生引用本文复制引用
王世振,孟维艳,矫国田,张滨,李保胜,窦林波,牛金城,蔡青..电解蚀刻法处理的钛及钛合金表面的对比研究[J].华西口腔医学杂志,2014,(6):596-600,5.基金项目
吉林省科技厅基金资助项目 （）
