金刚石与磨料磨具工程Issue(1)：71-74,4.DOI:10.13394/j.cnki.jgszz.2015.1.0016
砂带磨削Q235钢工艺参数对去除率的影响
Influence of processing parameters on material removal rate when grinding Q235 steel with abrasive belt
李东辉 1李庆忠 1沈俊 2刘利国 1顾慧健1
作者信息
- 1. 江南大学 机械工程学院，无锡 214122
- 2. 无锡富岛科技股份有限公司，无锡 214122
- 折叠
摘要
Abstract
Abrasive belt was used to grind Q235 steel on bundled bar polishing machine.Material removal rate of the workpiece after grinding was analyzed and optimal combination of processing parameters was discussed.The results indicated that when grinding Q235 steel with abrasive belt,wire speed had the most significant effect on material removal rate,followed by the turntable speed and abrasive particle size,while abrasive belt tensioning force had least effect.The optimal parameters of the material removal rate were:abrasive belt tensioning force 200 N,turntable speed 500 r/min, abrasive particle size 120# ,wire speed 50 m/min.In this case the material removal rate would reach 6.860 2 g/s.关键词
盘圆砂钢机/砂带磨削/Q235钢/材料去除率/工艺参数Key words
bundled bar polishing machine/abrasive belt grinding/Q235 steel/material removal rate/process parameters分类
矿业与冶金引用本文复制引用
李东辉,李庆忠,沈俊,刘利国,顾慧健..砂带磨削Q235钢工艺参数对去除率的影响[J].金刚石与磨料磨具工程,2015,(1):71-74,4.
