| 注册
首页|期刊导航|净水技术|印染废水厌氧水解过程挥发性脂肪酸的产生及影响因素

印染废水厌氧水解过程挥发性脂肪酸的产生及影响因素

操家顺 唐思远 李超 周彬宇

净水技术Issue(3):58-64,7.
净水技术Issue(3):58-64,7.

印染废水厌氧水解过程挥发性脂肪酸的产生及影响因素

Generation and Influencing Factors of Volatile Fatty Acids in Process of Anaerobic Hydrolysis for Printing and Dyeing Wastewater Treatment

操家顺 1唐思远 2李超 3周彬宇4

作者信息

  • 1. 河海大学浅水湖泊综合治理与资源开发教育部重点实验室,江苏南京 210098
  • 2. 河海大学环境学院,江苏南京210098
  • 3. 水文水资源高效利用与工程安全国家研究中心,江苏南京 210098
  • 4. 河海大学环境学院,江苏南京210098
  • 折叠

摘要

Abstract

For the low B/C ratio,lack of high-quality carbon source for denitrification and other problems of dyeing and printing wastewater,concentration and components of volatile fatty acids in dyeing wastewater effluent at different HRT and temperature in the process of anaerobic hydrolysis were studied. The results showed that the optimal HRT for dyeing wastewater was 15 h. The concentration of VFAs was up to 472. 1 mg/L,in which acetic acid accounted for 86. 5%. Compared to low temperature,VFAs were preferable in mesophilic anaerobic condition,but changes in temperature had little impact on the component of VFAs. For pre-treatment wastewater,the optimal HRT was 60 h,the concentration of VFAs in anaerobic effluent was up to 692. 4 mg/L. Reasonable concentration of VFAs produced in anaerobic process can provide high-quality carbon source for subsequent denitrification units,and thus lay the foundation for the reduction of total nitrogen of dyeing and printing wastewater.

关键词

印染废水/UASB/挥发性有机酸/厌氧水解

Key words

printing and dyeing wastewater/up-flow anaerobic sludge bed (UASB )/volatile fatty acid (VFAs )/anaerobic hydrolysis

分类

建筑与水利

引用本文复制引用

操家顺,唐思远,李超,周彬宇..印染废水厌氧水解过程挥发性脂肪酸的产生及影响因素[J].净水技术,2014,(3):58-64,7.

基金项目

国家水体污染控制与治理科技重大专项 ()

净水技术

OACSTPCD

1009-0177

访问量0
|
下载量0
段落导航相关论文