军事医学Issue(5)：377-379,406,4.DOI:10.7644/j.issn.1674-9960.2015.05.014
基于FPGA的实时脉冲信号峰值检测方法
An algorithm of real-time peak detection for pulse signals based on FPGA
暴洪涛 1程智 1陈锋 1王先文 1李辰宇 1关静 1吴太虎1
作者信息
- 1. 军事医学科学院卫生装备研究所，天津 300161
- 折叠
摘要
Abstract
Objective To present a new algorithm of real-time peak detection for pulse signals based on FPGA , which is known as the dynamic threshold with half peak detection method ( DT-HP ) .Methods With Gaussian-shaped pulse signals as the target , the method was improved from conventional methods .The FPGA detection process of the algorithm required no more than three detection parameters: the starting point , the maximum value and the pulse width .Results The algorithm solved the floating baseline and repeating detection that occur in traditional methods .Compared with the results of polynomial fitting method and flow cytometry , the difference was only 3.2% and 9.3%.Conclusion The algorithm takes less time ,RAM, and cache while allowing floating baseline detection , which can be used as an effective method for rapid detection in FPGA .关键词
脉冲信号/FPGA/信号处理/峰值检测/流式细胞术/荧光Key words
pulse signal/FPGA/signal processing/peak detection/flow cytometry/fluorescence分类
信息技术与安全科学引用本文复制引用
暴洪涛,程智,陈锋,王先文,李辰宇,关静,吴太虎..基于FPGA的实时脉冲信号峰值检测方法[J].军事医学,2015,(5):377-379,406,4.
