现代制造工程Issue(7)：11-15,5.
基于整车车门薄壁模拟块的铣削力模型研究
The experimental study of ball-end milling force for thin-wall door block
摘要
Abstract
Reviewed several ball-end milling force calculations ,and an orthogonal experiment scheme was adopted to investigate ball-end milling force for specific conditions in precision ball-end milling.Orthogonal regression analysis method was used to build the exponential model of ball-end milling force ,analysis of the influence of the milling parameters on milling force was given through the orthogonal experiment intuitive analysis table ,and the optimized parameters were proposed preliminary .At last milling experiment was applied to test and verify the accuracy of formula .All these provide a rapid calculation of milling force for workers and lay a firm foundation for the next study of thin-walled workpiece FEA and deformation control scheme .关键词
铣削力/球头铣刀/多元线性回归Key words
milling force/ball-end mill/multiple linear regression analysis分类
矿业与冶金引用本文复制引用
席吕超,韩先洪,孔啸,李铭..基于整车车门薄壁模拟块的铣削力模型研究[J].现代制造工程,2014,(7):11-15,5.基金项目
国家自然科学基金资助项目（51105247）；江苏省科技成果转换专项基金项目 （）
