现代制造工程Issue(4)：70-73,4.
0Cr18Ni9不锈钢焊缝高速铣削表面粗糙度试验研究
Experimental investigation of surface roughness in high-speed milling weld seam of 0Cr18Ni9
摘要
Abstract
The orthogonal experiment is processed for the study on the effect of the milling parameters on the weld seam of 0Cr18Ni9 surface roughness by the high speed milling .The empirical prediction model between the surface roughness and milling parameters is established .The research results indicate that the surface roughness decreases with the higher spindle speed ,but in-creases with the larger feed rate and cutting depth ,the feed rate has highly obvious influence .The interaction of the high spindle speed and low feed rate is favorable to reduce surface roughness and improve surface quality .关键词
0Cr18Ni9/焊缝/高速铣削/表面粗糙度Key words
0Cr18Ni9/weld seam/high-speed milling/surface roughness分类
矿业与冶金引用本文复制引用
刘小康,李家乐,陆龙生..0Cr18Ni9不锈钢焊缝高速铣削表面粗糙度试验研究[J].现代制造工程,2015,(4):70-73,4.基金项目
广东省重大科技计划专项 （）
