有色金属科学与工程Issue(5)：123-129,7.DOI:10.13264/j.cnki.ysjskx.2014.05.023
基于正交设计法的西藏玉龙铜矿酸浸工艺研究
Sulphuric acid leaching of Yulong oxide copper ore based on orthogonal design test
摘要
Abstract
In order to improve the sulphuric acid leaching rate of Yulong oxide copper ore orthogonal experimental design is applied to optimize the parameters of the acid leaching process, which can increase the copper leaching efficiency and provide the theory basis for industrialized production. Single factor optimum interval of oxide copper ore sulphuric acid leaching is firstly analyzed and then orthogonal optimization are conducted with factors of temperature, initial acidity, leaching time, liquid-solid ratio and grinding fineness being considered. It is shown that the temperature, initial acidity, leaching time, liquid-solid ratio and grinding fineness have contributions to the copper leaching efficiency, and temperature has greatest effects on the leaching rate. When the temperature is 30 ℃, the initial acidity is 100 g/L, the leaching time is 2 h, the liquid-solid ratio is 2:1 and grinding fineness of the particle size ≤74 μm with mineral powder accounting for 65%, copper leaching efficiency can be as high as 79.45%.关键词
铜氧化矿/正交设计/硫酸浸出/浸出率Key words
oxide copper ore/orthogonal design/sulphuric acid leaching/leaching rate分类
矿业与冶金引用本文复制引用
黄家全,王亚萍,王铧泰,彭堂见,吴学玲,周洪波,曾伟民..基于正交设计法的西藏玉龙铜矿酸浸工艺研究[J].有色金属科学与工程,2014,(5):123-129,7.基金项目
国家自然科学青年科学基金项目（31200382）；国家重点基础研究发展计划（973计划）项目（2010CB630903）；国家自然科学基金国际合作重大项目 （）
