有色金属科学与工程Issue(1)：116-120,5.DOI:10.13264/j.cnki.ysjskx.2015.01.022
基于ANSYS的变速箱轴承压头选择可行性分析
Feasibility analysis of selecting gearbox bearings indenter based on ANSYS
摘要
Abstract
This paper makes stress and strain analysis of the press-fits of A and B modeled bearings under the condition of A model bearing indenter by using the statics analysis module of finite element software ANSYS to verify that the same output bearing indenter can be applied to press-fit bearings of two different models. Results show that both maximum stress and maximum deformation occur on the outside of upper bearing surface with safe and reliable intensity. It is verified that there is no need for indenter design and other related proofing software and hardware exclusively for B models bearing , which provides reliable technical support for the potential related problems.关键词
变速箱/轴承/压头/ANSYS/强度分析Key words
gearbox/bearing/indenter/ANSYS/strength analysis分类
机械制造引用本文复制引用
雷发成,赵运才..基于ANSYS的变速箱轴承压头选择可行性分析[J].有色金属科学与工程,2015,(1):116-120,5.基金项目
国家自然科学基金资助项目 （）
