有色金属科学与工程Issue(3)：67-71,5.DOI:10.13264/j.cnki.ysjskx.2015.03.013
大块铝基非晶的制备及Al/Al-Fe-V非晶复合材料的物性研究
Preparation of Al-based bulk amorphous alloys and properties of Al/Al-Fe-V amorphous composites
王建伟 1王萌 1何佳 1郭小合1
作者信息
- 1. 西安西电高压开关有限责任公司，西安 710018
- 折叠
摘要
Abstract
Fe and V powderis in certain ratios are joined in 6061 base powder. Amorphous powder of 23 nm is obtained after milling around 70 h. Composites with different amorphous contents are prepared by plasma sintering. Amorphous reinforcement enters the grain boundary regions, which become crystalline-amorphous strengthening interface. Aluminum matrix grain boundary gap becomes wide and disappears slowly with increasing content of amorphous powder. Due to indentation size effect and micro crack, the hardness of the composites decreases with increasing load. The hardness-load curve slope is larger when the load is less than 1.96 N. In contrast, the curve slope is eased. The indentation sharp cracks extend in the form of scattering.关键词
非晶/放电放电等离子烧结/显微维氏硬度/尺寸效应Key words
amorphous/spark plasma sintering/micro vickers hardness/size effect分类
矿业与冶金引用本文复制引用
王建伟,王萌,何佳,郭小合..大块铝基非晶的制备及Al/Al-Fe-V非晶复合材料的物性研究[J].有色金属科学与工程,2015,(3):67-71,5.
