起重运输机械Issue(7)：18-20,3.
焊装新夹具投入钢丝绳受力理论计算与仿真
专翱 1何庆平2
作者信息
- 1. 中船澄西远航船舶 广州 有限公司广州 511464
- 2. 广州明珞汽车装备有限公司广州 510535
- 折叠
摘要
Abstract
This paper provides theoretical force calculation during of the process of adopting new clamps. It conducts motion stimulation on the putting process with ADAMS software and concludes that the stress born by the steel wire rope in simulation result and that in theoretical calculation are basically the same. Through analysis and simulation of stress of steel wire rope during putting of new clamp,the maximum stress of steel wire rope during the motion of clamp can be determined, thus to provide basis for selecting and determining scheme of hoists and steel wire ropes in the new clamp putting scheme.关键词
夹具投入/钢丝绳/受力/理论计算/仿真Key words
clamp putting/steel wire rope/stress/theoretical calculation/simulation分类
矿业与冶金引用本文复制引用
专翱,何庆平..焊装新夹具投入钢丝绳受力理论计算与仿真[J].起重运输机械,2015,(7):18-20,3.
