武汉工程职业技术学院学报Issue(3)：59-61,3.
CSP热轧30CrMo钢的组织性能分析
An Analysis of Microstructure & Mechanical Properties of 30CrMo Steel Produced by CSP Line
谭文 1韩斌 1蔡珍 1魏兵1
作者信息
- 1. 武汉钢铁 集团 公司研究院 湖北 武汉430080
- 折叠
摘要
Abstract
The microstructure and mechanical properties of 30CrMo steel produced by the CSP line was examined and analyzed .The results showed that the sample taken from the coil tail revealed B +F+P mi-crostructure ,and the sample from the coil middle part showed F + P microstructure .Due to the micro-structure change in the different part of the coil ,mechanical properties varied accordingly .The tensile strength stood at 863MPa at the coil tail while it dropped to 688MPa at the coil middle part .Based on the variation of mechanical properties ,relevant technological process measures were also put forward in the paper .关键词
中高碳钢/微观组织/力学性能/CSPKey words
medium-high carbon steel/microstructure/mechanical properties/CSP分类
矿业与冶金引用本文复制引用
谭文,韩斌,蔡珍,魏兵..CSP热轧30CrMo钢的组织性能分析[J].武汉工程职业技术学院学报,2014,(3):59-61,3.
