西安工程大学学报Issue(2)：177-180,4.DOI:10.13338/j.issn.1674-649x.2015.02.009
新型袜机选针器CAN系统硬件电路设计
Design of CAN system hardware circuit of new socks machine′s needle selector
摘要
Abstract
On the basis of dual‐CAN controller LPC4357 ,CAN communication hardware circuit of new socks machine is designed .Firstly , the reason of selecting dual‐CAN is discussed . Then ,according to the overall layout of upper and lower monitors′hardware driver and wiring mode ,hardware circuit was designed and implemented based on FPGA ,CAN controller and transmitter .Finally the factors affecting the CAN bus communication reliability is analyzed , and the improvement plan is put forward .The practice proves that the hardware circuit has the advantage of simpler interface ,higher stability and better real‐time performance .关键词
选针器/LPC 4357/CAN总线/FPGAKey words
needle selector/LPC4357/CAN bus/FPGA分类
信息技术与安全科学引用本文复制引用
杨楠楠,张团善,吕双庆,张峰..新型袜机选针器CAN系统硬件电路设计[J].西安工程大学学报,2015,(2):177-180,4.基金项目
国家科技部攻关项目 （）
