原子能科学技术Issue(6)：1075-1079,5.DOI:10.7538/yzk.2015.49.06.1075
自吸式文丘里水洗器引射特性研究
Research on Injection Characteristics of Venturi Scrubber Worked in Self-priming Mode
周艳民 1孙中宁 1谷海峰 1苗壮1
作者信息
- 1. 哈尔滨工程大学 核安全与仿真技术国防重点学科实验室，黑龙江 哈尔滨 150001
- 折叠
摘要
Abstract
The injection characteristics of Venturi scrubber worked in self‐priming mode in containment filter venting system was studied experimentally under different air flows ,liquid levels and system pressures .The results indicate that with the increase of superficial gas velocity in throat ,the static pressure drop of both sides of the suction grows approximately following a parabolic law ,and the injection flow rate injecting into the Venturi scrubber increases linearly .T he effect of liquid level on injection character‐istics relates closely with the relative position to the outlet of the Venturi scrubber . When the liquid level is below the outlet ,the injection flow rate improves significantly with increasing liquid level and presents a partition phenomenon ,and in the low throat velocity ,the increase of liquid level is more effective to improve the injection flow rate . However ,when the liquid level is above the outlet ,it almost has no impact on the injection flow rate . The pressure is another important factor affecting the injection characteristic of self‐priming Venturi scrubber ,w hich is mainly caused by the change on gas density .In the range of 0‐150 kPa ,with the increase of pressure ,the injection flow rate improves greatly and the influence of pressure is more obvious in high throat velocity than in low throat velocity .关键词
文丘里水洗器/自吸式/引射量/安全壳过滤排放系统Key words
Venturi scrubber/self-priming/injection flow rate/containment filter venting system分类
能源科技引用本文复制引用
周艳民,孙中宁,谷海峰,苗壮..自吸式文丘里水洗器引射特性研究[J].原子能科学技术,2015,(6):1075-1079,5.
