中国舰船研究Issue(3)：93-98,6.DOI:10.3969/j.issn.1673-3185.2014.03.014
船舶机舱机械通风数值模拟分析和优化设计
Numerical Simulation and Optimization Design of Ship Engine Room Ventilation System
郭昂 1郭卫杰 1王驰明 2封海宝1
作者信息
- 1. 中国船舶科学研究中心，江苏无锡214082
- 2. 厦门船舶重工股份有限公司，福建厦门361000
- 折叠
摘要
Abstract
In this paper,the engine room ventilation system is analyzed numerically by utilizing the CFD method,and the optimization design of the marine surveillance ship ventilation is also presented to solve the problem of uneven distribution of airflow,large flow speed gradient,and higher temperature for certain operation and activity areas within the engine room. Specifically,by analyzing typical iso-surfaces, me-chanical inflow is changed to mechanical outflow, which increases the air flux by fifty percent, eliminating the airflow whirlpool and improving the airflow under proper negative pressure conditions. Furthermore,an inlet set is added on the starboard side to better eliminate the whirlpool and reduce the local temperature. All in all,the optimization design successfully meets the specification requirements and is seen to be easi-ly applicable,which is instructive to future engineering design.关键词
气流组织/计算流体力学/数值模拟/热环境/机舱通风Key words
airflow/Computational Fluid Dynamics(CFD)/numerical simulation/thermal environment/cabin ventilation分类
交通工程引用本文复制引用
郭昂,郭卫杰,王驰明,封海宝..船舶机舱机械通风数值模拟分析和优化设计[J].中国舰船研究,2014,(3):93-98,6.
