| 注册
首页|期刊导航|中国机械工程|双头单螺杆泵定子衬套力学行为分析

双头单螺杆泵定子衬套力学行为分析

石昌帅 杨启明 祝效华 童华

中国机械工程Issue(9):1143-1148,1152,7.
中国机械工程Issue(9):1143-1148,1152,7.DOI:10.3969/j.issn.1004-132X.2014.09.002

双头单螺杆泵定子衬套力学行为分析

Analysis of Mechanical Behavior for Double Helix Single Screw Pump Stator Lining

石昌帅 1杨启明 1祝效华 1童华1

作者信息

  • 1. 西南石油大学,成都,610500
  • 折叠

摘要

Abstract

In order to study the forced state and deformation regularity of an inner contour line of a double helix single screw pump stator lining,then analysing the internal pressure,pressure difference, material nonlinearity and Poisson's ratio of the rubber by FEM analysis software,the effects of the factors on stress and srain of a stator lining and deformation regularity of the inner contour line were analysed,and a displacement equation under uniformity internal pressure and maximum displacement formula under heterogeneous internal pressure of the inner contour line of a stator lining were fitted. The results show that the stress and strain of the stator lining vary periodically and the displacement is by sinusoidally varying of the stator lining inner contour line under uniform internal pressure,and displacement varying is linear relation as internal pressure varying.Under pressure difference,the maximum of stress and strain transfer to the location of pressure difference,and the deformation reg-ularity is changed,moreover,the values and varying ranges of displacement increase together.A tiny change of Poisson's ratio of the rubber can cause great effect on the deformation of the stator lining. Therefore,the rubberizing and varying of Poisson's ratio must be payed close attention during pro-duction,so as to enhancing the mechanical property of rubber.The work herein establishes a theoret-ical foundation for the choice of interference fit and linetype optimization design,and it has significant purport in engineering for improving work efficiency and useful life of the double helix single screw pump.

关键词

双头单螺杆泵/衬套/内压/泊松比/有限元模型/优化设计

Key words

double helix single screw pump/lining/internal pressure/Poisson's ratio/finite ele-ment modelling(FEM)/optimization design

分类

能源科技

引用本文复制引用

石昌帅,杨启明,祝效华,童华..双头单螺杆泵定子衬套力学行为分析[J].中国机械工程,2014,(9):1143-1148,1152,7.

基金项目

国家自然科学基金资助项目(50804040,51004082) (50804040,51004082)

四川省青年科技基金资助项目(2011JQ0020) (2011JQ0020)

西南石油大学研究生创新基金资助项目(GIFSB0709) (GIFSB0709)

中国机械工程

OA北大核心CSCDCSTPCD

1004-132X

访问量0
|
下载量0
段落导航相关论文