中国机械工程Issue(23)：3137-3141,3142,6.DOI:10.3969/j.issn.1004-132X.2014.23.003
机床基础大件振动时效工艺参数优化方法
Optimization Method of VSR Process Parameters for Large Machine Tool Body
摘要
Abstract
A new method of achieving the best process parameters of VSR through modal simula-tion was proposed herein.Then the average stress elimination rate of the new process and the original process on the bed casting was compared.The experimental results show that,the average stress elimination rate of the new technology is as 65·1%,while the original process is as 38·5%.Besides, the stress value of one test point under the original process condition increases instead.The stress elimination rate of the new process is higher than that of the original process.The results verify the correctness of the optimization method of VSR process parameters for large machine tool body.关键词
振动时效/模态仿真/盲孔法/应力消除率Key words
vibration stress relief(VSR)/modal simulation/blind hole method/stress relieving rate分类
机械制造引用本文复制引用
胡敏,余常武,赵万华,寸花英,袁胜万,张文凯..机床基础大件振动时效工艺参数优化方法[J].中国机械工程,2014,(23):3137-3141,3142,6.基金项目
国家自然科学基金资助项目(51235009) （51235009）
国家科技重大专项(2010ZX04001-021) （2010ZX04001-021）
