中国机械工程Issue(4)：484-490,7.DOI:10.3969/j.issn.1004132X.2015.04.011
基于瑞利分布的平面磨削温度场的仿真研究
Research on Finite Element Simulation of Temperature Field Based on Rayleigh Distribution in Surface Grinding
摘要
Abstract
On the basis of Rayleigh’s probability density function of undeformed chip thickness and considering the influences of grain tips’randomness on the heat flux,the heat flux entering the workpiece was assumed to have a Rayleigh distribution,a Rayleigh distribution heat source model was developed to evaluate the temperature field in surface grinding.The FEM simulation for some typical grinding conditions were carried out by using the Rayleigh distribution heat source model,the simula-tion results were compared with those obtained from triangle heat source model and rectangle heat source model,the influences of heat source model and grinding fluid on the temperature field were in-vestigated.By comparing with experimental results,a good agreement is found between the FEM re-sults obtained from Rayleigh distribution heat source model and experimental results.关键词
热源模型/磨削温度场/有限元仿真/磨削液Key words
heat source model/grinding temperature field/finite element simulation/grinding fluid分类
矿业与冶金引用本文复制引用
王艳,谢建华,刘建国,张省..基于瑞利分布的平面磨削温度场的仿真研究[J].中国机械工程,2015,(4):484-490,7.基金项目
上海市研究生创新基金资助项目(JWCXSL1402) （JWCXSL1402）
