| 注册
首页|期刊导航|表面技术|高铝青铜磷光复合冷喷涂层的发光及摩擦磨损性能

高铝青铜磷光复合冷喷涂层的发光及摩擦磨损性能

杜连超 李文生 何玲 杨效田 吕叶 王福全 安国升 冯力

表面技术Issue(8):31-37,7.
表面技术Issue(8):31-37,7.DOI:10.16490/j.cnki.issn.1001-3660.2015.08.006

高铝青铜磷光复合冷喷涂层的发光及摩擦磨损性能

Luminescence and Wear Properties of Cold Sprayed Cu-14 Al-X/Phosphorescence Composite Coating

杜连超 1李文生 1何玲 1杨效田 1吕叶 1王福全 1安国升 1冯力1

作者信息

  • 1. 兰州理工大学 有色金属先进加工与再利用国家重点实验室,兰州730050
  • 折叠

摘要

Abstract

ABSTRACT:Objective To combine the wear-resistant materials, coating preparation technology and the indication function of phosphor particles, and develop a simple and economic coating monitoring technology. Methods A Cu-14Al-X coating and a com-posite coating of Cu-14Al-X and SrAl2 O4:Eu2+,Dy3+phosphorescence particle were prepared on T3 copper substrate by cold gas dy-namic spray. SEM, EDS and fluorescence spectrophotometer were employed to observe the morphology of coatings and analyze the distribution and luminescent intensity of the embedded particles. Reciprocating friction and wear tester was used to evaluate the friction properties of the coatings under dry sliding condition at room temperature. Results Phosphor particles distributed homoge-nously in the cold sprayed Cu-14Al-X/phosphorescence composite coating. Under ultraviolet light, a strong luminescence was visi-ble in yellow-green light. The micro-hardness increased with the increased dose of phosphorescence particles. A shallow track was observed on the worn Cu-14Al-X/phosphorescence composite coating, which indicated a slight abrasive wear occurred during the sliding process. For the Cu-14Al-X coating, intense plastic deformation, adhesion of small drop-cuts and abrasive dusts were ob-served on the worn surface, abrasive and fatigue wears dominated in the sliding process. Conclusion The addition of phosphor par-ticles improved the wear-resistance performance of composite coating. Under ultraviolet light, no luminescence was visible on the worn Cu-14Al-X/phosphorescence composite coating, realizing the function of detecting the existence of coating.

关键词

高铝青铜/磷光粒子/复合涂层/发光性能/摩擦磨损

Key words

Cu-14Al-X/phosphorescence particle/composite coating/luminescence property/friction and wear

分类

矿业与冶金

引用本文复制引用

杜连超,李文生,何玲,杨效田,吕叶,王福全,安国升,冯力..高铝青铜磷光复合冷喷涂层的发光及摩擦磨损性能[J].表面技术,2015,(8):31-37,7.

基金项目

国家国际科技合作项目(2013DFR50790) (2013DFR50790)

中国科学院西部之光计划(01-0526) (01-0526)

甘肃省杰出青年基金资助项目(1111RJDA013) (1111RJDA013)

国家自然基金与英国皇家学会交流项目(51211130116)Fund:Supported by Key Program for International S&T Cooperation Projects of China(2013DFR50790) (51211130116)

West Light Foundation of the Chinese Academy of Sciences(01-0526) (01-0526)

the Gansu Province Outstanding Youth Fund(1111RJDA013) (1111RJDA013)

The Project in Cooperation with the British Royal Institute of the National Natural Science Foundation of China(51211130116) (51211130116)

表面技术

OA北大核心CSCDCSTPCD

1001-3660

访问量0
|
下载量0
段落导航相关论文