河南农业科学Issue(8)：145-148,4.DOI:10.15933/j.cnki.1004-3268.2015.08.032
制丝工艺参数对烟叶叶丝耐加工性和填充值的影响
Effects of Primary Processing Parameters on Processing Characteristics and Filling Power of Cut Tobacco
刘国栋 1王旭锋 1李向阳1
作者信息
- 1. 陕西中烟工业有限责任公司澄城卷烟厂，陕西 澄城715299
- 折叠
摘要
Abstract
In order to improve the processing characteristics and the rolling quality of cigarettes, the effects of primary processing parameters on the processing characteristics and filling power of cut strips were investigated with single factor experiment and orthogonal experiment. The results showed that,within the test range,the changing rate of the ratio of complete cut tobacco showed a trend of increasing first and then reducing with the increase of moisture content of cut tobacco resurgence,the filling power increased with the increase of cut width,the elasticity of cut strips showed a trend of increasing first and then redu-cing with the increase of process gas flow rate of dryer. There were significant correlations between cut width and filling power. There were significant correlations between regain moisture content and the chan-ging rate of the ratio of complete cut tobacco. The appropriate parameters were cut width of 1. 11 mm, moisture content of cut tobacco resurgence of 25%,process gas flow rate of dryer of 14 500 kg/h. After optimization,the changing rate of the ratio of complete cut tobacco increased by 2. 01 percentage points, the filling value raised by 0. 15 cm3/g,the elasticity increased by 1. 1 percentage points.关键词
烟丝/制丝工艺参数/正交试验/耐加工性/填充值Key words
cut tobacco/primary processing parameters/orthogonal experiment/processing characteris-tics/filling power分类
轻工纺织引用本文复制引用
刘国栋,王旭锋,李向阳..制丝工艺参数对烟叶叶丝耐加工性和填充值的影响[J].河南农业科学,2015,(8):145-148,4.
