金刚石与磨料磨具工程Issue(4)：22-25,32,5.DOI:10.13394/j.cnki.jgszz.2015.4.0005
超声振动辅助磨削3Cr13不锈钢孔表面粗糙度研究
Study on surface roughness after ultrasonic vibration assisted grinding on the hole of 3Cr13 martensitic stainless steel
摘要
Abstract
The ultrasonic vibration assisted grinding(UAG)experiments were carried out on the hole of 3Cr13 martensitic stainless steel with CBN abrasive tools.The purpose of the experiment was to explore the effect of UAG on surface roughness.The surface morphology of the hole of stainless steel were detected using the three-dimensional video microscope. Single particle trajectories and the influencing factors on surface roughness were analyzed.The result indicated that the groove on the hole of stainless steel was sine curve with cross-cutting.The maximum undeformed chip thickness of UAG was smaller than that of common grinding when the other processing parameters remained unchanged. The surface roughness of surface ground with ultrasonic vibration was smoother than that of common ground surface.关键词
超声振动辅助磨削/不锈钢/表面粗糙度Key words
ultrasonic vibration assisted grinding/stainless steel/surface roughness分类
矿业与冶金引用本文复制引用
王骞,杨长勇,傅玉灿,徐九华,高绍武,杨能阁,闫文..超声振动辅助磨削3Cr13不锈钢孔表面粗糙度研究[J].金刚石与磨料磨具工程,2015,(4):22-25,32,5.基金项目
国家自然科学基金(51305200) （51305200）
江苏省自然科学基金(BK20130805) （BK20130805）
江苏省科技支撑项目(BE2013122) （BE2013122）
南京航空航天大学研究生创新基地(实验室)开放基金(kfjj201435) （实验室）
中央高校基本业务费专项资金资助。 （）
