模具技术Issue(4)：19-20,54,3.
接电弹片的冲模设计
Design of stamping die for the electricity connecting shrapnel
胡清根 1朱宏安 1李旭东1
作者信息
- 1. 江西农业工程职业学院 机电系，江西 樟树 331200
- 折叠
摘要
Abstract
The forming process plan for electricity connecting shrapnel was analyzed ,and the main structure of the stamping die was introduced .The inner and outer guides were used to guarantee the guide accuracy of the small punch , and the processes of punching , notching ,bending and cutting were integrated in one progressive die .This die structure can greatly enhance the production efficiency and solve the problem that the part with small dis‐tance holes is difficult to be produced by using single or compound die .The disassembling and maintaining of the punch and die are convenient due to the insert structures .Practice proves that this progressive die has good performance in the production .关键词
接电弹片/内/外双重导向/凸模设计/凹模设计/冲模设计Key words
electricity connecting shrapnel/inner and outer guides/convex die design/con-cave die design/stamping die design分类
矿业与冶金引用本文复制引用
胡清根,朱宏安,李旭东..接电弹片的冲模设计[J].模具技术,2015,(4):19-20,54,3.
