渔业现代化Issue(4)：44-47,4.DOI:10.3969/j.issn.1007-9580.2015.04.010
导管桨拖网渔船的机桨匹配设计软件开发
The development of software for hull-engine-propeller matching design
摘要
Abstract
Trawlers, as a kind of multiple working condition ship, the requirements of the design of trawling state and the state of navigation are different.In order to increase utilization rate of fuel, better achieve energy conservation and emissions reduction, the matching design of main engine and ducted propeller is very necessary.The design of engine-propeller matching software is based on the MATLAB language.It will be available on multi-operating ducted propeller.We created three databases of fishing boat, ducted propeller, and host engine.Based on the theory of catheter oar map design, the software not only can provide matching design, but also can calculate the reduction ratio of the gear box according to the working condition of the trawler.The final design calculation sheet can be generated at the same time.The newly developed software was tested through 42m trawler.It is verified that the software design has higher precision, easy to use, and some practical engineering value.关键词
导管桨/拖网渔船/机桨匹配设计/软件开发Key words
ducted propeller/trawler/matching design of ship engine and propeller/software development分类
交通工程引用本文复制引用
陈虹,张晓君,王艺真..导管桨拖网渔船的机桨匹配设计软件开发[J].渔业现代化,2015,(4):44-47,4.基金项目
浙江省科学技术厅项目“浙江渔船标准化研究开发（2012C21094）” （）
