重庆医学Issue(28)：3966-3968,3.DOI:10.3969/j.issn.1671-8348.2015.28.023
载距突的 CT 定位及相关测量的研究
Study on using CT to locating mark of sustentaculum tali and the parameter measurement
摘要
Abstract
Objective To use CT and 3D reconstruction technique to locating mark of sustentaculum tali ,and measure the an‐gle & length of the specified point of the lateral wall of the calcaneus to sustentaculum tali for providing .To basis for the operation of calcaneus .Methods Thirty adult ankle wet specimens were chosen and scanned with CT ,and the dicom data were converted into the software to 3D‐reconstruction ,the observation and measurement to find new methods of locating mark of sustentaculum tali ;Forty adult calcaneus dried specimens were chosen and scanned with CT .The dicom data were converted into the software to 3D‐re‐construction ,using a workstation software measure the angle and length of the line which from the center of the sustentaculum tail to each point on the calcaneal lateral wall .Results First ,in the function of ankle joint position ,with the foot medial surface as “sag‐ittal reference plane” measurement ,the vertical line passing through the leading edge of medial malleols and the coronal line passing through the leading edge of sustentaculum tali intersect at a point .The vertical distance of the point to leading edge of medial malle‐ols was (34 .95 ± 2 .60) mm ,the length of sustentaculum tali was (21 .44 ± 1 .89) mm ,the height of sustentaculum tali was (10 .17 ± 1 .16) mm ,the anteversion of sustentaculum tali was (35 .31 ± 3 .73)° .Second ,in front of calcaneus ,upward angel of points G ,E were (28 .78 ± 3 .90 )° ,(29 .47 ± 2 .96 )° respectively .Frontward angle of points G ,E were ( - 19 .83 ± 4 .60 )° , ( - 11 .02 ± 4 .74)° respectively .Under the posterior articular surface ,upward angel of points C ,K ,I ,J were(2 .52 ± 2 .46)° ,(2 .92 ± 2 .28)° ,(14 .98 ± 2 .49)° ,(14 .38 ± 1 .90)° respectively .Frontward angle of points C ,K ,I ,J were(7 .32 ± 1 .66)° ,(19 .25 ± 1 .98)° , (10 .30 ± 2 .63)° ,(19 .33 ± 1 .97)° respectively .The length of screw was about 40 - 44 mm .The length of C point to the sustentacu‐lum tail was minimum ,and the length of G was maximum .Conclusion In the function of ankle joint position ,the sustentaculum tail can be located with the leading edge of medial malleols as a surface landmarks .The measurement of the angle and length of which from each point on the calcaneal lateral wall to sustentaculum tail by using CT .关键词
载距突/切开复位内固定术/体层摄影术 ,X 线计算机/内踝前缘Key words
sustentaculum tali/open reduction and internal fixation/tomography ,X-ray computed/leading edge of medial malleols分类
医药卫生引用本文复制引用
那磊,王培,孙勃,丁华杰,高君,王维,姜洪涛,于昌玉..载距突的 CT 定位及相关测量的研究[J].重庆医学,2015,(28):3966-3968,3.基金项目
河北省卫生厅科研基金项目（20130027）。 （）
