| 注册
首页|期刊导航|电力系统自动化|IEC 61850应用于配电自动化系统的配置方法

IEC 61850应用于配电自动化系统的配置方法

朱正谊 徐丙垠 韩国政 范开俊

电力系统自动化Issue(21):144-150,7.
电力系统自动化Issue(21):144-150,7.DOI:10.7500/AEPS20150110001

IEC 61850应用于配电自动化系统的配置方法

IEC 61850 Based Configuration Method for Distribution Automation System

朱正谊 1徐丙垠 2韩国政 3范开俊1

作者信息

  • 1. 山东大学电气工程学院,山东省济南市 250061
  • 2. 山东理工大学智能电网研究中心,山东省淄博市 255049
  • 3. 齐鲁工业大学电气工程与自动化学院,山东省济南市 250353
  • 折叠

摘要

Abstract

To deal with the issue of IEC 61850 based configuration method for the distribution automation system(DAS),this paper analyzes the characteristics of DAS in terms of system structure,control application and engineering scenario which make the configuration process different from the substation automation system(SAS).The configuration requirements for DAS are presented based on the analysis,including the feeder-oriented granularity,topology information content as well as integration modes for subareas and feeder equipment.Then the neighborhood topology information related to an intelligent electronic device(IED) with both primary connectivity and instantiated communication interfaces concerned is extracted to support the application of distributed control in DAS and as a resultant expression for the configuration content.According to the system configuration descriptive language (SCL) scheme in IEC 61850,the redefined configuration files are produced including modified structure and additional content,consisting of feeder configuration description,neighborhood feeder configuration description,feeder configuration exchange description and IED configuration description,etc.For the typical engineering scenarios of “a group of IEDs",a reference model of information flow in the first configuration and configuration updating process is put forward.Finally,the configuration mode for DAS featuring from whole to partial,from partial to whole and plug and play is concluded and analyzed with a practical example.

关键词

IEC 61850/配电自动化/分布式控制/配置内容/配置文件/配置模式

Key words

IEC 61850/distribution automation/distributed control/configuration content/configuration files/configuration mode

引用本文复制引用

朱正谊,徐丙垠,韩国政,范开俊..IEC 61850应用于配电自动化系统的配置方法[J].电力系统自动化,2015,(21):144-150,7.

基金项目

国家高技术研究发展计划(863计划)资助项目(2012AA050213)。@@@@This work is supported by National High Technology Research and Development Program of China (863 Program)(No.2012AA050213) (863计划)

电力系统自动化

OA北大核心CSCDCSTPCD

1000-1026

访问量0
|
下载量0
段落导航相关论文