化工进展2015，Vol.34Issue(12)：4301-4304,4342,5.DOI:10.16085/j.issn.1000-6613.2015.12.027
紫外光固化可剥离胶的研究与制备
Preparation of ultraviolet-irradiated strippable adhesive
解月伟 1解一军 1高晓哲 1樊芳1
作者信息
- 1. 河北工业大学化工学院,天津 300130
- 折叠
摘要
Abstract
UV strippable adhesive was obtained by adding multifunctional photosensitive resin into adhesive prepared in prior from mixing thermoplastic elastomer SIS proportionally with viscosified resin. The effect of resin/SIS ratio and the amount of the photosensitive resin added on the performance of the product were investigated. Mechanical properties of the products were tested by both the initial adhesion and the 180° peel strength measurements. The bonding/stripping performance of UV strippable adhesive was also characterized by FTIR,DMA and SEM. The experimental results showed that whenm(rosin):m(SIS) was (0.6:1)—(1:1) andm(CN9013NS):m(effective constituent) was (1.4:1)—(1.7:1),the peel strength of the UV strippable adhesive could reach 6—12N/25mm and sharply dropped to less than 1N/25mm before and after UV irradiation and no residue were detected.关键词
热塑性弹性体/光固化/可剥离/黏合剂Key words
thermoplastic elastomer/UV-curable/strippable/adhesive分类
化学化工引用本文复制引用
解月伟,解一军,高晓哲,樊芳..紫外光固化可剥离胶的研究与制备[J].化工进展,2015,34(12):4301-4304,4342,5.
