机电工程技术Issue(7)：133-135,3.DOI:10.3969/j.issn.1009-9492.2013.07.037
基于ADAMS与VC6.0的凸轮机构设计、仿真与自动编程
Design,Simulation and Automatic Programming of Cam Mechanism Based on ADAMS and VC6.0
吴国军1
作者信息
- 1. 中国船舶重工集团公司第七一五研究所，浙江杭州 310012
- 折叠
摘要
Abstract
Cam is a traditional target motion mechanism, to achieve a variety of complex movement. The existence of the traditional method of cam design are complicated and low efficiency. For a particular trajectory of the cam mechanism, using ADAMS software to design and simulation, which greatly improves design efficiency. Using VC6.0 based on the ADAMS software to automatic programming for the NC,shortening the production cycle .In practice, this method has achieved good results.关键词
凸轮/设计/仿真/VC6.0/自动化编程Key words
cam/design/simulation/VC6.0/automatic programming分类
信息技术与安全科学引用本文复制引用
吴国军..基于ADAMS与VC6.0的凸轮机构设计、仿真与自动编程[J].机电工程技术,2013,(7):133-135,3.
