机电工程技术Issue(8)：115-118,136,5.DOI:10.3969/j.issn.1009-9492.2013.08.029
真空回潮机余热回收冷凝器的设计
Design of the Heat Recovery Condenser Vacuum Resurgence Machine
靳光磊1
作者信息
- 1. 河南中烟工业有限责任公司漯河卷烟厂，河南漯河 462000
- 折叠
摘要
Abstract
In order to form a heat recovery system,fixed tube sheet of a shell and tube condenser is manufactured. Steam is condensed by the shell side of the heat pipe cooling water. The cooling water used to absorb heat recycles in the radiator pipe,then stored in the tank, the temperature was increased from 60℃to 70℃. The waste heat recovery of mixed steam of low pressure, instantaneous, large flow of steam and air discharged by ejector pump is processed. On the one hand,it can improve energy waste and noise pollution caused by waste stream emissions. On the other hand, it can be used as the replenishment of the bath heat exchange equipment, which can save consumption of bath steam and realize energy conservation and environmental protection.关键词
烟草/真空回潮机/余热回收/冷凝器/节能Key words
tobacco/vacuum conditioner/waste heat recovery/condenser/energy saving分类
轻工纺织引用本文复制引用
靳光磊..真空回潮机余热回收冷凝器的设计[J].机电工程技术,2013,(8):115-118,136,5.
