起重运输机械Issue(9)：18-20,21,4.
带式输送机传动滚筒胀套的设计及选用原则
胡喜磊 1韩刚 1马涛1
作者信息
- 1. 太原科技大学机械工程学院 太原 030024
- 折叠
摘要
Abstract
The drum is an important part of the belt conveyer.Generally a flat key connection type is adopted for pre-vious drum shafts and drum hubs , but such kind of drum cannot meet conveying requirements any more with the develop -ment of long-distance, wide belt, large capacity, and high-speed belt conveyers.The paper mainly introduces design of ta-per-lock connection of the drum and corresponding calculations for the belt conveyer , and further describes the selection principle of the taper-lock.关键词
带式输送机/滚筒轴/轮毂/胀套/联接螺栓Key words
belt conveyer/transmission drum shaft/hub/taper-lock/connecting bolt分类
机械制造引用本文复制引用
胡喜磊,韩刚,马涛..带式输送机传动滚筒胀套的设计及选用原则[J].起重运输机械,2013,(9):18-20,21,4.
