石油钻采工艺Issue(1)：45-47,3.
套管内钻孔深穿透径向井技术
Research on deep penetration of radial well hole-drilling in casing
党文辉 1马宏伟 2陈建林 2李永刚 3尹相荣2
作者信息
- 1. 新疆油田公司工程技术研究院，新疆克拉玛依 834000
- 2. 新疆油田公司百口泉采油厂，新疆克拉玛依 834000
- 3. 新疆油田公司开发公司，新疆克拉玛依 834000
- 折叠
摘要
Abstract
The mechanism of deep penetration of radial well with hole-drilling in casing technology developed in recent years is to form a plurality of radial hole in reservoir through high pressure water jetting, which could enlarge the drainage area and reduce production pressure drop. This paper analyzes the technical principles of this technology, and then proves the mechanism with well and layer selection of test wells through technical applicability. On the basis of these, the radial hole design plan of two testing wells were proposed, and the on-site operation situation was illuminated from the aspect of field test preparation and construction techniques. The testing results showed that both wells site construction had met the requirement of the design and made the yield increasing effect at some certain degree, even though failed to achieve the anticipated capacity. It is thought that the sand blocking resulted from debris flow-back difficulties is the key reason for increase of output not enough during the radial water jetting process.关键词
套管钻孔/水力喷射/径向井/导向器/百口泉油田Key words
casing borehole/hydraulic jetting/radial well/guiding device/Baikouquan oilfield分类
能源科技引用本文复制引用
党文辉,马宏伟,陈建林,李永刚,尹相荣..套管内钻孔深穿透径向井技术[J].石油钻采工艺,2013,(1):45-47,3.
