| 注册
首页|期刊导航|烟草科技|卷烟设计参数对钟形抽吸曲线下烟气稀释作用的影响

卷烟设计参数对钟形抽吸曲线下烟气稀释作用的影响

颜水明 李斌 谢国勇 颜清萍 银董红 朱震 王兵

烟草科技2015,Vol.48Issue(9):62-68,7.
烟草科技2015,Vol.48Issue(9):62-68,7.DOI:10.16135/j.issn1002-0861.20150911

卷烟设计参数对钟形抽吸曲线下烟气稀释作用的影响

Effects of Cigarette Material Parameters on Cigarette Smoke Dilution Under Bell-shaped Puff Profile

颜水明 1李斌 2谢国勇 3颜清萍 1银董红 1朱震 2王兵1

作者信息

  • 1. 湖南中烟工业有限责任公司技术研发中心,长沙市劳动中路426号 410007
  • 2. 湖南师范大学化学化工学院,长沙市麓山路36号 410081
  • 3. 中国烟草总公司郑州烟草研究院 烟草行业烟草工艺重点实验室,郑州高新技术产业开发区枫杨街2号 450001
  • 折叠

摘要

Abstract

In order to study the effects of cigarette material parameters on cigarette smoke dilution, a device for measuring cigarette smoke diffusion was established under ISO bell-shaped puff profile. Methods for measuring the dilution rate of cigarette smoke under three conditions (unlighted full length cigarette, combustion cone, burnt cigarette rods of different remaining lengths) were developed. The effects of cigarette material parameters (cigarette paper permeability, filter ventilation rate and the remaininglength of burnt cigarette) on the dilution rate of cigarette smoke under the three conditions were investigated. The results showed that: 1) The dilution rate of cigarette smoke under the three conditions increased with the increase of cigarette paper permeability within the range of 30-70 CU, it was 5.97%-12.16% for unlighted full length cigarette, the largest among the three conditions. 2) The dilution rate of cigarette smoke at the filter end of cigarette was 0-59.81% within the filter ventilation rate of 0-50.8%, which was higher under ISO bell-shaped puff profile than under GB/T22838.15—2009 constant velocity puff profile. 3) The dilution rate of cigarette smoke at the tobacco end increased with the increase of the remaining length of burnt cigarette, it was 0-12.58% while the remaining length of burnt cigarette ranged from 0 to 30 mm.

关键词

卷烟材料/烟气稀释/卷烟纸透气度/滤嘴通风度/抽吸条件

Key words

Cigarette material/Smoke dilution/Cigarette paper permeability/Filter ventilation rate/Smoking condition

分类

轻工纺织

引用本文复制引用

颜水明,李斌,谢国勇,颜清萍,银董红,朱震,王兵..卷烟设计参数对钟形抽吸曲线下烟气稀释作用的影响[J].烟草科技,2015,48(9):62-68,7.

基金项目

湖南中烟工业有限责任公司科技项目"卷烟燃烧状态与一氧化碳释放量的关系研究"(KY2012JC0001). (KY2012JC0001)

烟草科技

OA北大核心CSCDCSTPCD

1002-0861

访问量0
|
下载量0
段落导航相关论文