烟草科技2015，Vol.48Issue(10)：89-92,4.
低强度松散回潮系统的设计及应用
Design and Application of Low Processing Intensity Loosening & Conditioning System
张玉和 1易斌 2范晓宝 1尹春晖 3杨玉波 1孙豪 4张小东 1李静义1
作者信息
- 1. 秦皇岛烟草机械有限责任公司,河北省秦皇岛经济技术开发区龙海道67号 066318
- 2. 云南中烟工业有限责任公司技术中心,昆明市五华区红锦路367号 650231
- 3. 红塔烟草(集团)有限责任公司昭通卷烟厂,云南省昭通市昭阳区南郊凤凰山 657000
- 4. 中烟机械技术中心有限责任公司,上海市浦东新区金海路1000号 201206
- 折叠
摘要
Abstract
As a solution to the higher breakage rate of strips caused by mechanical action and the intrinsic quality of strips affected by higher temperature in cylinder loosening and conditioning, a pre-loosening device was developed, wherein the vertically sliced tobacco block was subjected to bending and pre-loosened along the layers formed natureally during baling. The conditioning cylinder was modified by replacing the long spikers with octagonal short ones and divided into four functional sections responsible separately for loosening, spreading, conditioning and casing to facilitate following processing. The results showed that the outlet tobacco temperature was lower (≤53℃), the loosening rate of strips was over 99.5%, the average amount of tobacco scraps reduced from 86.5 to 79.6 kg/batch, and the average amount of tobacco dust decreased from 6.1 to 3.2 kg/batch. The new system effectively reduced the processing intensity, decreased the breakage of strips, promoted the uniformity of heating and conditioning, kept natural tobacco aroma, and improved the processing quality of strips.关键词
滚筒式松散回潮机/低强度/烟块/片烟/预松散Key words
Cylinder loosening and conditioning system/Low intensity/Tobacco block/Strip/Pre-loosening分类
轻工纺织引用本文复制引用
张玉和,易斌,范晓宝,尹春晖,杨玉波,孙豪,张小东,李静义..低强度松散回潮系统的设计及应用[J].烟草科技,2015,48(10):89-92,4.
