原子能科学技术Issue(10)：1839-1843,5.DOI:10.7538/yzk.2015.49.10.1839
CARR铱源试验靶件设计和试验验证
Design and Test Verification for 192 Ir Test Target in CARR
马勇哲 1邱妙莲 1高永光 1徐西安 1丁丽 1窦勤明1
作者信息
- 1. 中国原子能科学研究院反应堆工程研究设计所，北京 102413
- 折叠
摘要
Abstract
The 192 Ir test target was designed and manufactured in order to support the project of 192 Ir irradiation production in China Advanced Research Reactor (CARR) . Design parameters and structural dimensions of test target were described .The special heat transfer device was used to simulate outer and inner heat transfer conditions of the test target .The wall temperature and inner temperature of the heat transfer device were measured ,which simulated the wall temperature of capsule and the temperature of spec‐imens in capsule .The results prove that the thermal analysis method is suitable .The in‐pile test target contains the capsule with specimens and the simulating capsules with equivalent heat transfer conditions .Data obtained from in‐pile tests verify the results of physical and thermal analysis comprehensively , w hich can provide a basis for safety evaluation of 192 Ir irradiation production in CARR and are conservative .关键词
铱源/试验靶件/试验验证Key words
192 Ir/test target/test verification分类
能源科技引用本文复制引用
马勇哲,邱妙莲,高永光,徐西安,丁丽,窦勤明..CARR铱源试验靶件设计和试验验证[J].原子能科学技术,2015,(10):1839-1843,5.
