湖南工业大学学报Issue(5)：34-39,87,7.DOI:10.3969/j.issn.1673-9833.2015.05.008
面齿轮磨削温度建模仿真与分析
Modeling and Analysis of Face-Gear Grinding Temperature
摘要
Abstract
According to the elliptical contact theory , obtained disc wheel basic grinding parameters of gear grinding surface and established finite element model, and using the rectangular distribution of heat for the gear grinding thermal simulation, obtained the grinding temperature field. The results showed that the temperature variation law of the saucer wheel grinding is : along the direction of tooth proximal near heart and along the direction of tooth height relatively close to the root area, the grinding temperature gradually increased. Meanwhile using infrared thermometer to measure actual grinding temperature, compared the measured temperatures with the finite elemental analysis results, found that the error analysis results of all the grinding points were between 20% and 5%, and the higher the temperature, the smaller the error was, verified the feasibility of the ellipse contact theory in the surface gear grinding thermal research.关键词
椭圆接触理论/面齿轮磨削/温度场点磨削/有限元仿真Key words
the elliptical contact theory/face gear grinding/point grinding temperature field/finite element simulation分类
机械制造引用本文复制引用
肖磊,明兴祖,刘金华,高钦,龙誉..面齿轮磨削温度建模仿真与分析[J].湖南工业大学学报,2015,(5):34-39,87,7.基金项目
国家自然科学基金资助项目（51375161），湖南省自然科学基金资助项目 （）
