重庆大学学报Issue(6)：84-90,7.DOI:10.11835/j.issn.1000-582X.2015.06.012
用于齿面扭曲消减的齿向修形曲线设计方法
Method of designing tooth-trace modification curve for reducing the gear flank distortions
摘要
Abstract
As there are issues such as high cost and low efficiency in reducing the flank distortions with threaded grinding wheel,an approach to improve the issues in design process is explored in this paper. Firstly,according to the contact trace analysis on worm wheel grinding,a novel method to calculate the magnitude of gear flank twist is proposed and the influence of crowning and helix angle on the magnitude of flank twist is analyzed.Secondly,an optimization method of crowning modification curve is proposed, which divides crowning curve into three parts to calculate the lengthwise crowning of the left and the right parts respectively.Then within allowance of gear design requirement,the flank distortions are lessened by adjusting scale factors and flank crowning.At last,an example verifies that the method could eliminate the gear twist and reduce the corrected errors.关键词
蜗杆砂轮磨/齿向修形/齿面扭曲/接触迹Key words
continuous generation grinding/tooth-trace modification/flank twist/contact path分类
机械制造引用本文复制引用
李国龙,夏冬,何坤,孔二方..用于齿面扭曲消减的齿向修形曲线设计方法[J].重庆大学学报,2015,(6):84-90,7.基金项目
国家科技支撑计划项目（2014BAF08B02）；国家自然科学基金资助项目（51375512）。Supported by National Science and Technology Supporting Program （2014BAF08B02）and National Natural Science Foundation of China（51375512）． （）
