机电工程技术Issue(1)：88-91,4.DOI:10.3969/j.issn.1009-9492.2016.01.023
钢管模压校直机模具的有限元分析及改进
Finite Element Analysis and Improvement of Molds of Steel Straightening Machine
吴苏炜 1徐鹏 1吴玉月 1纪克鹏 1张志伟1
作者信息
- 1. 合肥通用机械研究院，安徽合肥 230088
- 折叠
摘要
Abstract
Steel molding mold is the key component of straightening equipment,and which is an important problem of deformation during actual use, and affecting the accuracy of steel pipe straightening seriously. In order to solve the structural problems of the mold, using ANSYS finite element analysis software to build parametric models of steel straightening machine molds,analyzing and studying the static performance of the molds. Based on the analysis results,propose improved and optimized programs,and validated the improved program using finite element analysis. Results showed that the improved mold meet the using requirements well, and the maximum deformation reduced to 5%comparing the deformation of the original structure.关键词
钢管校直机/模具/有限元分析/Ansys软件Key words
steel straightening machine/mold/finite element analysis/Ansys software分类
矿业与冶金引用本文复制引用
吴苏炜,徐鹏,吴玉月,纪克鹏,张志伟..钢管模压校直机模具的有限元分析及改进[J].机电工程技术,2016,(1):88-91,4.
