照明工程学报Issue(6)：127-130,4.DOI:10.3969/j.issn.1004-440X.2015.06.027
频闪效应数码成像的原理及仿真
Principle and Simulation of Digital Imaging for Stroboscopic Effect
顾兆泰 1卢东平 1缑从军1
作者信息
- 1. 东莞华明灯具有限公司实验室，广东东莞 523653
- 折叠
摘要
Abstract
Presently , solid-state lighting luminaires have no standard to define an acceptable frequency , amplitude variation , and standardised measurement procedures for flicker . Most consumers prefer to evaluate flicker by the acceptability of flicker pattern photographed by cell phone camera .In this paper , the principle of digital imaging of stroboscopic effect is analyzed , summarized into equations and verified by Matlab simulation .It could be a useful tool for luminaire manufacturers in collecting sufficient data to specify the flicker criteria based on the consumers ’ habit for their products .关键词
闪烁/频闪效应/闪烁指数/闪烁百分比Key words
flicker/stroboscopic effect/flicker index/percent flicker分类
信息技术与安全科学引用本文复制引用
顾兆泰,卢东平,缑从军..频闪效应数码成像的原理及仿真[J].照明工程学报,2015,(6):127-130,4.
