郑州大学学报（工学版）2016，Vol.37Issue(1)：75-78,4.DOI:10.3969/j.issn.1671-6833.201503065
TBM盘形滚刀破岩过程的数值研究
Numerical Research on Rock Fragmentation Process of TBM Disc Cutter
摘要
Abstract
In this paper, the dynamic simulation and analysis of TBM ( Tunnel Boring Machine) hob cutting rock process is simulated by using ANSYS/LS-DYNA. The load of TBM hob in the cutting process and the effect of cutting parameters such as disc rotation speed and cutting depth of hob effects on the hob cutting load are studied. The results show, when the epitaxial compressive strength of rock is 45 MPa, the average value of the lateral force, rolling force and normal force under the hob is about 0 kN, 0. 45 kN, 4. 5 kN, and the best penetration and rational cutting speed is 10 mm and 3. 6 r/min, which provides a reasonable basis for the de-signing staff parameters under the condition of the second hard rock.关键词
TBM滚刀/破岩过程/LS-DYNA/有限元仿真Key words
TBM disc cutter/rock fragmentation process/LS-DYNA/FEA simulation分类
机械制造引用本文复制引用
张银霞,江志强,段留洋,王栋,刘治华..TBM盘形滚刀破岩过程的数值研究[J].郑州大学学报（工学版）,2016,37(1):75-78,4.基金项目
国家863计划资助项目(2012AA041801) （2012AA041801）
河南省教育厅科学技术研究重点资助项目(14A460001) （14A460001）
河南省重点科技攻关资助项目(152102210045) （152102210045）
